How to check or change a timer, How to clear a timer – Philips TV-Video Combi 14PV320/05 User Manual
Page 20
D Under ’
VPS/PDC
’, use the
AP q
or
P rB
button to switch ’VPS or PDC’ on or off.
f
Confirm with the
OK
button when the information is
correct.
g
Confirm the message on the screen with the
OK
button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
h
To end, press the
TIMER k
button.
i
Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a
Press the
TIMER k
button on the remote control.
b
Select the line ’
Timer programming
’ with the
buttons
AP q
or
P rB
and confirm with the
SqC
button.
c
Select the TIMER you want to check or change with the
AP q
or
P rB
button and confirm with the
OK
button.
d
Select the entry field with the
DSr
or
SqC
button.
e
Change any information with the
AP q
or
P rB
button or with the
0-9
buttons.
D Under ’
LP
’, use the
AP q
or
P rB
button to
select the recording speed ’SP’ or ’LP’.
f
Confirm with the
OK
button.
g
To end, press the
TIMER k
button.
h
Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a
Press the
TIMER k
button on the remote control.
b
Select the line ’
Timer programming
’ with the
buttons
AP q
or
P rB
and confirm with the
SqC
button.
c
Select the TIMER you want to clear with the buttons
AP q
or
P rB
.
d
Press the
CLEAR
button.
e
Switch off with the
TIMER k
button.
18