Philips TV-Video Combi 14PV320/05 - Manual (Page 19)

e Confirm with the OK button. Your programming details
will then appear on the TV screen.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã Exit: Start:
« press TIMER press è
D If VIDEOPlus+ does not recognise the TV channel,
’ P?? ’ will appear on the TV screen. Instead of
’ P?? ’, you can select the programme number you
want with the number buttons 0-9 .
D If ’
Code error ’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the
TIMER k button.
D If ’
Daily error ’ appears on the TV screen, the
date was incorrectly entered.
D Under ’
VPS/PDC ’, use the AP q or P rB
button to switch ’VPS or PDC’ on or off.
D Under ’
LP ’, use the or P rB button to select the
recording speed ’SP’ or ’LP’.
D The TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
D When you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
D If the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
D If you forget to load a cassette, ’
No cassette ’
will appear.
D If you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
h To end, press the TIMER k button.
Programming a recording
(without ’VIDEOPlus’)
a Press the TIMER k button on the remote control.
b Select the line ’ Timer programming ’ with the
buttons AP q or P rB and confirm with the
SqC button.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:-- - - -----
ã Exit: Start:
« press TIMER press è
c Select a free TIMER block with the P pAB button.
Press the OK button.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã Exit: Start:
« press TIMER press è
d Select the entry field with the DSr or SqC
button.
e Enter information with the buttons AP q or P rB or
with the digit buttons 0-9 .
D Under ’
REP. ’, use the AP q or P rB button to
select daily or weekly programming.
’
Mo-Fr ’: If you want to make a recording every day
from Monday to Friday.
’
Mo-Su ’: If you want to make a recording every day
from Monday to Sunday.
’
WEEKL ’: If you want to make a recording every
week on the same day of the week.
’
ONCE ’: If you want to make only one recording.
D Under ’
LP ’, use the AP q or P rB button to
select the recording speed ’SP’ or ’LP’.
17