Precision Power G41840 PAR-650 - Manual (Page 4)

retract with each press.
●
IN and OUT Position - A knob is set to its in position when it is initially
extended. To set a knob to its out position pull gently on the knob until a
plainly-felt notched position is reached.
NOTE: DO NOT use excessive force when using the adjustment knobs
or damage to their release mechanism can result.
1. Master Volume/Fader Control Knob
●
IN/Volume - When in, this knob controls the overall volume of the
system. It affects all line-level outputs to the amplifiers.
●
OUT/FADER - When out, this knob controls the front to rear
balance of the high-pass output jacks.
2. Input Source LED - The color of the LED indicates which input source
is currently active.
●
GREEN - Indicates Source 1 is active.
●
RED - Indicates Source 2 is active.
●
ORANGE - Indicates the control panel AUX is active.
3. Input Source Switch - This is a momentary push-button switch that will
cycle through the three input sources by activating a new input source
each time it is pressed.
NOTE: The EQ defaults to SRC 1 when the unit is switched on.
4. Subwoofer Volume Control
●
IN/SUB VOLUME - When in, this knob controls the dedicated
subwoofer output volume.
●
OUT/SUB VOLUME - When out, this knob controls the low-pass
3