Philips E-GSM 900 - Manual (Page 29)

24 Operator
10 • Operator
Most items of this menu are subscription dependent
and specific to operators. Consequently, the menus
shown following may or may not be available.
Contact your network operator for details.
The services provided may involve making a phone
call or sending a SMS for which you may be charged.
When you are in an active call, you can dial a number
(or select a contact in the phonebook) and press
( .
The first call is put on hold and the second number is
dialled. Then press
, to access the following
options:
•
Switch calls to toggle between calls.
• Transfer to connect the two calls. You are dis-
connected when the transfer is completed.
• Conference to introduce the caller into a con-
ference call.
• End call to hang up the active line.
You can also use < and > to toggle between calls.
When you receive a second call while already in
communication, the phone emits a beep alert and the
screen displays
Call waiting . You can then:
To receive a second call, you must have deactivated the
Call forward for voice calls (see page 22) and activated
the Call waiting (see page 23).
A conference call allows you to speak with up to 5
callers at the same time.
1.
Make a first call, then a second one .
2. Press , and select Conference .
3. Repeat the process until 5 callers are connected.
Making a second call
Answering a second call
Press ( To answer the call (the first one is put
on hold). Then press
, and select:
• Switch calls to toggle between calls,
• Conference to introduce the new
caller into a conference call.
Press ) To reject the call.
Press , To select End call to end the current
call, then answer the incoming call.
Conference call
Philips160_GB_4311 255 63101.book Page 24 Vendredi, 12. août 2005 9:36 09