Patton electronic SL4050/B2/E - Manual (Page 25)

Setting up the VoIP SIP phone 25
SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP Phone
Set up ADSL password
1. Press
2. Enter the ADSL password
DISABLE ADSL dialup
1. Press
2. Use to select DISABLE
DHCP (Dynamic Host Configuration Protocol)
DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different
place in the network. If your ISP provides static IP address, you must disable DHCP and enter the IP
address provided.
ENABLE DHCP
1. Press
2. Use or to set DHCP to ENABLE
3. Press . The IP address is automatically acquired
4. Press . The subnet mask is automatically acquired
5. Press . The router IP address is automatically acquired
DISABLE DHCP
1. Press
2. Use or to set DHCP to DISABLE
3. Press . Use the numeric keypad to enter the IP address
OK
Cancel OK
IP Address:
010.000.000.100
Subnet Mask:
255.255.255.000
Router IP:
010.000.000.254
Cancel OK
IP Address:
010.000.000.100