Display, Controls and displays 04 – Pioneer VSX-817-S/-K User Manual
Page 24
Controls and displays
04
24
En
Display
Illustration shows the VSX-817 model
1
SIGNAL SELECT
indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when
AUTO
signal select is on.
SB
(VSX-817 model only)
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2
DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
2
Lights to indicate decoding of a DTS
multichannel signal.
3
2
DIGITAL
Lights to indicate decoding of a Dolby Digital
multichannel signal.
4
2
PRO LOGIC II
x
(VSX-817 model only)/
2
PRO LOGIC II
2
PRO LOGIC II
x
lights to indicate Pro Logic
IIx decoding.
2
PRO LOGIC II
lights to
indicate Pro Logic II decoding (see
Listening in
surround sound
on page 31 for more on this).
5
VIR.SB
Lights during Virtual surround back
processing (page 35).
6
DIRECT
Lights when source Stream Direct playback is
in use. Stream Direct playback bypasses the
tone controls for the most accurate
reproduction of a source.
7
AUTO SURR.
Lights when the Auto Surround feature is
switched on (see
Auto playback
on page 31).
8
ATT
Lights when
ANALOG ATT
is used to attenuate
(reduce) the level of the analog input signal.
9
SLEEP
Lights when the receiver is in sleep mode.
10
Tuner
indicators
/
MONO
Lights when the mono mode is set using
the
MPX
button.
6
6
0
L
C
R
Ls
Rs
[
]
[
]
[
]
[
]
[
]
SB
SB
[
]
R
40 125 250 4K13K
L
[
]
SP
A B
1
2
3
4 5
6
7
8 9 10
13
17
16
18
19
14
15
20 21
22
12
11
VSX517_817.fm 24 ページ ２００７年２月２２日 木曜日 午後８時１１分