Panasonic PT-61LCZ7 - Manual (Page 30)

30
Channel and Program Tuning
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed. (p. 26-27)
Follow the procedure below to directly enter the channel
number using the NUMBER keys.
Select analog channel
Procedure
1. Press the NUMBER keys to enter the Channel
number. Press OK.
The following is an example of tuning to channel 15.
Note
If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Select digital channel
Procedure
1. If tuning a digital channel and your channel
contains more than one program, press
PROG- and enter the program (1, 2, 3 etc.)
using the NUMBER keys. Press OK.
The following is an example of tuning to channel 15-1.
Note
If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
•
•
•
•
Direct Tuning Example
Step Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press OK 15
Direct Tuning Example
Step Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press OK 15
Direct Tuning Example
Step Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press PROG- 15-
4 Press 1 15-1
5 Press OK 15-1
Direct Tuning Example
Step Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press PROG- 15-
4 Press 1 15-1
5 Press OK 15-1
Projection Display operation (continued)
Unit Status Display
Press CH < > or RECALL, except when the MENU
screen is dis played, to display current unit status
information.
Channel Banner: Minimized
Procedure
1. Press CH
< >
to minimize the displayed
channel banner.
It will display the channel number, and the station
identification (if available).
Channel Banner: Maximized
Procedure
1. Press RECALL to maximize the displayed
channel banner.
Audio Mute
Press MUTE to instantly mute the sound. Press again to
restore the previous sound level.
Procedure
1. Press MUTE to mute the sound. Press again
to reactivate sound.
Sound is also reactivated when power is turned off or
volume level is changed.
Note
The audio output from AV OUT is not muted.
•
•
•
15-2
ABC-HD
Channel Number
Station Identifier
15-2
ABC-HD
Channel Number
Station Identifier
CC SAP
Andrew’s cooking show
TV-G 4:3 1080i Standard
15-2
ABC-HD
30
Closed Caption
Channel, Program and Station identifier
SAP indication Signal resolution
Picture mode
Aspect ratio
Time remaining
in Sleep Timer Rating Level
Program title
CC SAP
Andrew’s cooking show
TV-G 4:3 1080i Standard
15-2
ABC-HD
30
Closed Caption
Channel, Program and Station identifier
SAP indication Signal resolution
Picture mode
Aspect ratio
Time remaining
in Sleep Timer Rating Level
Program title