Philips DVD615AT99 - Manual (Page 13)

Hookups (cont’d) 13
Connecting to a TV and a two-channel Stereo
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Back of TV
(example only)
LEFT AUDIO IN
RIGHT AUDIO IN
1
Stereo
(example only)
VIDEO IN
2
VIDEO IN
3
Y
Pb
Pr
VIDEO
OUT
1 Connect the supplied video cable to the yellow VIDEO
(VIDEO OUT) jack of the Player and to the TV’s
VIDEO IN jack. The supplied video cable has yellow ends.
2 Connect the supplied audio cable to the red and white
AUDIO OUT (right and left) jacks on the Player and to the
right/left AUDIO IN jacks on the Stereo. The supplied audio
cable has red and white ends. Match the cable colors to the jack
colors. The red jack is the Right audio channel and the white jack is
the Left audio channel.
3 Plug the power cords of the Player, Stereo, and the TV into
an active power outlet.
Press down POWER ON/OFF on the front of the Player to
turn on the Player.
4 Turn on the Stereo power and set your Stereo to the cor-
rect Audio In channel or sound source. Refer to the Stereo
owner’s manual for details.
5
Turn on the TV power. Set the TV to the correct Video In
channel. See your TV owner’s manual for details. Or, change chan-
nels at the TV until you see the blue Philips DVD background
screen or the Player’s screen saver on the TV.
• If you prefer or need to use the
S-VIDEO or Y Pb Pr jacks
instead, see pages 11-12. You
only need one video connection
between the TV and the Player.
Helpful Hint