beautypg.com

Palsonic PDM-103 User Manual

Page 3

background image

A flashing indication appears on the display when the batteries need to be changed.

Note

Auto Power-off function

Then the unit is stopped (standby mode) for
approximately 30 seconds, the power is
automatically turned off.

Note

7. BASIC DISC PLAY

CAUTION:
Wait for the disc to stop rotating before pressing
the OPEN button.

This unit can play 3" (8cm) single CD's without
an adaptor. Do not use a CD single adaptor for
these discs.

9

1. Connect the earphone to the PHONES
socket.
2. Press the OPEN button to open the CD
compartment lid.
3. Adjust the VOLUME to minimum.
4. Insert the disc with the label side Facing
up.
5. Close the lid securely until a click is heard.
6. Press the PLAY button to start playing.

To Emphasise the bass sound

Set the BASS BOOST switch to the ON
position.

BASS BOOST

ON

OFF

The bass boost performance will be
dependent on the VOLUME control setting.

Turning Power on and off

This unit has no ON/OFF switch. To turn on
and off, press the following buttons.
To turn on:

Press || PLAY/PAUSE (playback
starts).

Press STOP button once to
standby mode.
Press STOP button twice, it
will turn off the power
immediately.

When the || is pressed
The total number of tracks and total playing time in the
disc will be displayed after 2 seconds.

During PLAY mode
The total number of tracks on the disc are played

During PAUSE mode
The track playback is paused, the elapsed time is flashing.

HOLD OPERATION

During the playback, turn HOLD switch "ON
to avoid any interruption whilst press CD
control button.

10

Note

Remove the Disc

Hold the edge and gently press the centre
pivot as illustrated, the pick up the disc,

To turn off:

8. LCD DISPLAY INFORMATION

10. INTRO SCAN AND RANDOM PLAY

X1

PLAY/PAUSE

1

ALL

9. REPEAT/PLAY MODES

Every time the MODE button is pressed.
The corresponding mode appears in the display window.

MODE

MODE

MODE

MODE

NORMAL

REPEAT 1

REPEAT ALL

SHUFFLE

Play the whole disc.

During the play

Shown on the LCD display. The current
track on the disc will be repeated.

MODE

During the play

Shown on the LCD display. All
tracks on the disc will be repeated.

MODE

Note: In normal modes none of the above symbol show in the display.

11

During the play

x3

Press mode button to select intro scan play.

MODE

CD player now is ready to play the first 10 seconds of each track on the disc

Press || to start playing "INTRO" scan.

Enables all the tracks on a disc to be played in a Random sequence.

During playback SHUFF indicator will show on the display and disc will play in random order
after the current track had been played.

For example

:

If "SHUFFLE" is selected whilst playing track 8, the random function.

will commence once track 8 has ended.
When all tracks on a disc have been played, the player will automatically stop and power
down in approx. 30 seconds to preserve battery life.

During the play

MODE

X4

Press MODE button twice to return to NORMAL play mode

12

NORMAL PLAYBACK

X1

X2

INTRO

ALL

1

INTRO SCAN

SHUFFLE

During the play