Planar PL1900 User Manual

Page 6

PRECAUTIONS

Do not use the monitor near water, e.g. near a bathtub, washbowl,

kitchen sink, laundry tub, swimming pool or in a wet basement.

Do not place the monitor on an unstable cart, stand, or table. If the

monitor falls, it can injure a person and cause serious damage to

the appliance. Use only a cart or stand recommended by the

manufacturer or sold with the monitor. If you mount the monitor on

a wall or shelf, use a mounting kit approved by the manufacturer

and follow the kit instructions.

Slots and openings in the back and bottom of the cabinet are

provided for ventilation. To ensure reliable operation of the monitor

and to protect it from overheating, be sure these openings are not

blocked or covered. Do not place the monitor on a bed, sofa, rug,

or similar surface. Do not place the monitor near or over a radiator

or heat register. Do not place the monitor in a bookcase or cabinet

unless proper ventilation is provided.

The monitor should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power

supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a

plug with a third (grounding) pin. This plug will fit only into a

grounded power outlet as a safety feature. If your outlet does not

accommodate the three-wire plug, have an electrician install the

correct outlet, or use an adapter to ground the appliance safely. Do

not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightening storm or when it will not be used

for long period of time. This will protect the monitor from damage

due to power surges.

Do not overload power strips and extension cords. Overloading can

result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could

short circuit parts causing a fire or electric shock. Never spill liquids

on the monitor.

Do not attempt to service the monitor by yourself; opening or

removing covers can expose you to dangerous voltages and other

hazards. Please refer all servicing to qualified service personnel.

To ensure satisfactory operation, use the monitor only with UL

listed computers which have appropriate configured receptacles

marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be

easily accessible.

For use only with the attached power adapter (Output 12Vdc)

which have UL, CSA listed license.