Pioneer KURO PDK-TS33 - Manual (Page 9)

9
En
English
Thank you for buying Pioneer’s product.
Please read through the Operating Instructions to learn how
to operate your model safely and properly.
Please be advised to keep the Operating Instructions in
your place for future reference.
Installation
• Consult your dealer if you encounter any difficulties
with this installation.
• Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
Contents
Cautions .................................................................... 9
Checking the Standard Accessories ...................... 10
Assembling the Stand ........................................... 11
Attaching the Cushion .......................................... 12
Attaching the Pioneer Display and Television .... 13
Installing the Product on a Rack etc. .................... 14
Preventing Equipment from Falling Over ............ 15
Specifications ......................................................... 15
Dimensions Diagram ............................................. 16
Cautions
This product is a table top stand exclusively designed
for Pioneer displays and televisions (PDP-LX5090 / PDP-
LX5090H / PDP-LX509A /PDP-C509A / KRP-500P / KRP-
500M).
Use with other model is capable of resulting in instability
causing possible injury. For further information, please
contact the store where you purchased your display.
Do not install or modify the product other than specified.
Do not use this stand for a Pioneer display and television
other than those designated and do not modify it or use it for
other purposes.
Installation Location
• Select a location that is strong enough to support the
weight of the stand and the displays.
• Make sure to place it in a level and stable location.
• Do not install it outdoors or in a wet place such as at a
hot spring or near a beach.
• Do not install the stand where it may be subjected to
vibration or shock.
Assembling and Installation
• Assemble the stand in accordance with the assembly
instructions and securely attach all screws at the
designated locations.
There have been cases where unforeseen accidents
such as the equipment breaking or falling over
occurred after the installation of the display because
the stand was not installed as instructed.
• The display must always be installed by two or more
people to assure it is installed safely.
• Before installation, turn off the power for the display
and peripheral devices then remove the power cord
plug from the power outlet.
Prevent accidents caused by the product falling over, by
taking reliable measures to prevent it from falling over (see
page 15).
Pioneer display, television and stand compatibility
table
Pioneer display and television Table top stand
50 inch under speaker model PDK-TS33A/PDK-TS33
50 inch side speaker model KRP-TS02