Pioneer KURO PDK-TS33 - Manual (Page 15)

15
En
English
Preventing Equipment from Falling Over
Stabilizing on a rack etc.
Use screws (those available on the market) to fix the Pioneer
display and television like shown in the diagram.
����
To stabilize the equipment on
a table, use screws that have a
nominal diameter of 4 mm (5/32
inch) and that are at least 20 mm
(13/16 inch) long.
������������������
��������������
���������������������������������������������
��������������������������������������������
������
�������
��������������������
�����������
����������
������������
���� �����������
�������������
����������������������
Using a wall for stabilization
1
Attaching falling prevention bolts (hooks)
to the Pioneer display and television.
2
Using strong cords to firmly stabilize it
appropriately and firmly to a wall, pillar,
or other sturdy element.
Perform this work in the same way on the left and right
sides.
����
Use hooks, cords, and fittings that
are available on the market.
Recommended hook:
Nominal diameter M8
Length 12 mm to 15 mm (1/2 inch to 5/8 inch)
�
����
�
����
�������
��
��������������
����������������������
Specifications
External dimensions:
KRP-TS02 ............. 552 mm (W) × 323 mm (H) × 350 mm (D) (21-23/32 in. (W) × 12-23/32 in. (H) × 13-25/32 in. (D))
PDK-TS33 ............ 550 mm (W) × 402 mm (H) × 349 mm (D) (21-21/32 in. (W) × 15-13/16 in. (H) × 13-3/4 in. (D))
PDK-TS33A .......... 552 mm (W) × 402 mm (H) × 350 mm (D) (21-23/32 in. (W) × 15-13/16 in. (H) × 13-25/32 in. (D))
Weight :
KRP-TS02 ............. 2.5 kg (5.6 lbs)
PDK-TS33 ............ 2.2 kg (4.9 lbs)
PDK-TS33A .......... 2.7 kg (6.0 lbs)
• The above specifications and exterior may be modified without prior notice to improve the product.
• After installing the stand, be sure to take special care to ensure that the equipment will not fall over.
• Secure the plasma television to both the rack and the wall surface.