Pure Sonus-1XT - Manual (Page 4)

4
Quick start
This section provides information on how to set up and start using your radio.
1
Fully extend the aerial, connect the mains adapter and plug in to your power
supply.
2
Push the Standby button to switch the unit on.
The LCD lights up, the radio says ‘Welcome to the PURE SONUS-1 XT with iVOX.
Autotune in progress, please wait’ and a progress bar indicates the progress
of a full autotune to find the stations available. When finished the number of
stations found is announced, the station names are placed in a station list and
you hear the first station.
3
Adjust the volume control if required.
4
Turn the Tune knob to browse the station list. When you stop the station name
will be announced. Push Tune to select and listen to another station.
5
Push the Info button and repeat to cycle through the optional display modes
including the full screen clock.