Pure Sonus-1XT User Manual
Page 13
13
Display settings
Turn the Tune knob to view current settings and push to change one of the
following.
Brightness
To change the screen brightness turn the Tune knob and push to choose
between Low, High or Low/Timeout (backlight off until a button is pushed).
Standby mode
You can choose whether the backlight is on or off when your SONUS-1
XT
is in
standby mode. If you switch the backlight off in standby mode a touch on the
SnoozeHandle will override this and turn the backlight on for a few seconds to
display the clock, useful for checking the time in the middle of the night.
To change the display standby mode turn the Tune knob and push to choose
between Backlight on and Backlight off.
Audio settings
Digital output
The Digital Output setting controls the Digital Out socket on the rear of your
radio. Turn the Tune knob and push to select one of the following options:
On - if you want continuous output to an amplifier or recorder.
Off/Timer - if you want to connect to a recorder with a synchro-record feature.
Display settings
Brightness
High
Backlight off
Digital out