PSB Speakers VS400 - Manual (Page 10)

V. CONNECTIONS
Important: Always turn off your electronic equipment before connecting speakers.
Selecting Speaker Wire
We recommend a minimum of 16 gauge speaker wire for normal length runs, and up
to 12 gauge for long runs (over 30 feet).
You may wish to audition and compare the performance of some of the specialty
audio interconnects and speaker cable available from your dealer.
When wall mounted
When wall mounting the VS300 you may wish to hide the speaker wires in the walls.
The wall mounting bracket includes a larger central hole near the input terminal cup
that allows the wires to enter the wall without being visible from the front. From the
wall bracket the wires can run back to a central equipment location or simply run
down to a junction box near the floor. Unless you are experienced in house wiring,
we recommend you engage the services of a custom installer.
Making the Connections
Be sure to connect all of the speakers in your system in an identical manner: Red or
(+) amp/receiver terminal to Red (+) speaker terminal, Black (-) to Black (-). This will
Attaching the Base Kit
10