Peavey Automix2 - Manual (Page 9)

AUTOMIX ª 2 SPECIFICATIONS
Nominal Out = 2.21 dBu = 1 Volt
Input Specifications:
Function Input z Input Gains Input Levels Bal./ Connector
(ohms) Setting (to bal. outputs) Unbal.
Min Min* Nominal** Max
Microphone 2k Max Gain -64dBu -43dBu -2dBu Bal. Mic In (+)
(150 ohms) (60dB) (0.5mV) (5.5mV) (615mV) Mic In (-)
Ground
Line >20k Max Gain -35dBu -14dBu +27dBu Bal. Line In (+)
(10K ohms) (30dB) 13.7mV (155mV) (17.4V) Line In (-)
Ground
* Minimum input level (Sensitivity) is the smallest signal that will produce nominal output (2.21dBu) with channel and
master controls set for maximum gain.
** Nominal settings are defined s all control set at 0 dB (or 50% rotation for rotary pots.
EIN: -122dBu (Max gain, terminated 150 Ohms)
Phantom Power: +48 Volts at Mic ± terminated
Priority (Channels 1 and 2): 0dB to 9dB
Low Cut Filter: -3dB at 100Hz (6dB per octave)
Common Mode: >65dB at 20Hz Ñ 20kHz
Rejection Ratio: >85dB @ 1kHz
Output Specifications:
Minimum Output Levels Bal./ Connector
Function Load Z Unbal. Main Out (=)
(Ohms) Nominal Max
Main Out 600 +2.21dBu +20dBu +16dBm Bal. Main Out (+)
(1V) (7.75V) (6.44V) Main Out (-)
(Hi Z load) (600½ load) Ground
Aux Out 600 +2.21dBu +20dBu +16dBm Bal. Aux Out (+)
(1V) (Hi Z load) (600½ load) Aux Out (-)
Ground
Distortion:
Mic Input to Main Output: <0.2% at nominal (20Hz to 20kHz)
Frequency Response:
Mic Input Main Output: 20Hz to 20kHz +0/-1 dB at nominal
Mic Input to Aux Output: 20Hz to 20kHz +0/-1 dB at nominal
9