Panasonic KX TG2258PW - Manual (Page 23)

Making Calls
Cor
dless T
elephone
For assistance, please call: 1-800-211-PANA(7262)
23
To dial after confirming the
entered number
If noise interferes with the
conversation
Have the unit select a clearer
channel by doing one of the
following:
Press
[ ] (Channel) if talking
using [ ] ,
press [ ] (Channel) if talking
using [ ] , or
press CH , which is displayed when
you adjust receiver or speaker
volume (p. 24).
OR
Walk closer to the base unit.
To redial the last number
dialed
Press [ ] or [ ] , then press
[REDIAL] .
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed with
the handset are stored in the redial list.
• To erase an item, scroll to the
desired item then press Erase .
• If “ No items stored ” is displayed,
the list is empty.
To put a call on hold
To return to the call, press [ ] or
[ ] .
• The base unit user can return to the
call by pressing [SP-PHONE] .
• If another phone is connected on the
same line, you can also return to the
call by lifting its handset.
• If a call is kept holding for 6 minutes,
an alarm tone will start to sound. After
4 additional minutes on hold, the call
will be disconnected.
• The alarm volume corresponds to the
ringer volume level (p. 17). If the
ringer is OFF, the alarm will sound at
the LOW level.
1 Enter a phone number.
• If you misdial, press Clear .
Enter the correct number.
• If a pause is required for dialing,
press Pause where needed
(p. 41).
• To cancel, press [OFF] .
2 Press [ ] or [ ] .
3 To hang up, press [OFF] or
place the handset on the base
unit.
3334444
Clear Pause
1 Press [REDIAL] .
• The last number dialed is
displayed.
2 Scroll to the desired number by
pressing
[ ] or [ ].
• You can also scroll through the
list by pressing [REDIAL].
• To exit the list, press [OFF] or
Exit .
3 Press [ ] or [ ] .
Press Hold during a conversation.
• “Hold” is displayed.
• To transfer the call to the base unit,
see page 39.
333-4444
Exit Erase
>
>
>
>
Talk
00-00-08
(VE) Hold