beautypg.com

Safety & troubleshooting, Safety and troubleshooting information – Philips 150P2E/150P2D User Manual

Page 2

background image

Safety and Troubleshooting Information

Safety Precautions and Maintenance

Installation Locations

FAQs

Troubleshooting

Regulatory Information

Other Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Unplug the monitor, if you are not going to use it for an extensive period of time.

Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry
cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based
liquids.

Consult a service technician if the monitor does not operate normally when following the instructions
in this manual.

The casing cover should be opened only by qualified service personnel.

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds, then attach
the power cable or DC power cord for normal operation.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

Notice that always activate a screen saver program during your application. If an image remains in
the screen for an extended period of time, it may leave an after-image in front of the screen.
The after-image will disappear gradually over a period of time after switching off the power.

Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.

RETURN TO TOP OF THE PAGE

Installation Locations

Avoid Heat and Extreme Cold

Safety & Troubleshooting

file:///D|/Grace/150P2/english/150p2e/safety/safety.htm (1 of 2) [8/9/2001 11:25:18 AM]