Panasonic AK-MSU930P - Manual (Page 14)

14
External dimension drawing
Connections
AUX LINK CSU
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
POWER
DC IN
G N D
Master Setup Unit
Unit: inch
(mm)
7/8 (22)
7/8 (22)
13-3/8
(340)
3-1/4
(82)
12-1/16
(306)
Connections of the system components
1. Connect this panel by connecting its CCU connector to
the MSU/CSU connector on the rear panel of the CCU
using the dedicated ROP cable (optional accessory).
2. After having connected all the components, set the
CCU’s main power switch to ON, and then set the
camera power switch to ON.
≥
When the camera is not connected, the functions which
can be controlled using this panel are limited to the CCU
control items.
≥ Before disconnecting the ROP able, be certain to set
CCU’s camera power switch to OFF.
MSU/CSU
1
AUX LINK CSU
AK-HCU931P
AK-HRP931P
ROP cable