Panasonic WV-NS202 - Manual (Page 51)

51
Step 5
Select the detection sensitivity from the following. The
selected detection sensitivity will be applied to all the
VMD areas.
High/Middle/Low
Default: Middle
Step 6
Click the [SET] button after completing the settings.
Important:
The setting will not be applied unless the [SET] but-
ton is clicked.
Delete the VMD area set for the designated preset position
Step 1
Display the VMD area setup window of the preset posi-
tion number whose VMD area is to be deleted.
(
☞ page 50)
Step 2
Click the [Delete] button respective to the area to be
deleted.
→ The outline of the area will disappear.
Step 3
Click the [SET] button.
→ The deletion will be completed.
Important:
The deletion will not be completed unless the [SET]
button is clicked.