Panasonic WV-NS202 - Manual (Page 35)

35
Set mask areas
When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas.
Step 1
Display the setup menu of "Image Adjust". ( ☞ page 32)
Step 2
Click the [START] button of "Mask area".
→ Borders will appear and the image displayed on the
[Image/Position] tab will be divided into 48 (6x8).
Step 3
Click the divided areas to be masked.
→ The clicked areas will be masked and will become
white.
To cancel masking, click the area again.
Step 4
Click the [END] button after completing masking areas.
→ The borders on the image displayed on the [Image/
Position] tab will disappear.
Note:
When the [RESET] button is clicked, masking for all
the masked areas will be canceled.