Philips SDV3132/27 - Manual (Page 6)

6 EN
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
Connect the antenna to a digital tuner. •
If the signal strength is good enough, the
channels can be memorized in the tuner
automatically .
Connect the antenna directly to the TV.
•
Tune to the analogue channels and find the
best antenna location. Then re-connect
the antenna to the digital tuner. Ensure the
signal strength is good enough before you
install the channels with the tuner.
5 Frequently
asked questions
Can this antenna receive digital or work with
ATSC broadcasts?
Yes, this antenna is designed to receive ATSC
and HDTV broadcasts.
Where should I place the antenna in order to
get the best reception possible?
Choose a location near a window which gives
the antenna a clear view of the transmitter.
Note
For best reception, place the antenna away from the
•
metal surface to avoid interference.
Can I set up this antenna with a digital tuner?
Yes, this antenna can be set up with a digital
tuner. (see ‘Set up a digital tuner with this
antenna’ on page 7)
Note
To check the distance from the local TV broadcast •
transmitters to your location, visit www.antennaweb.
org for more information.
Mount SDV3132 on the wall
1
Choose a spot near the TV.
2
Position the screws to fit the hooking
holes.
3
Fix the provided screws into the wall and
make sure they are fixed firmly into the
wall.
4
Hook the antenna on the wall.
4 Set up a digital
tuner with this
antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has