Philips SDV3132/27 - Manual (Page 5)

5 EN
English
Connect to the TV
1
One end of the coaxial cable is already
connected to the signal output of the
antenna.
2
Connect the other end to the input on
the TV receiver.
Tune for better reception
1
Turn the TV to the desired channel/
station.
2
Turn the antenna around until the
reception is achieved.
TV
ANT.
360
2 Welcome
Congratulations on your purchase and welcome
to Philips!
To fully benefit from the support that Philips
offers, register your product at www.philips.
com/welcome.
3 Set up SDV3132
To ensure the antenna to work properly, read
the user manual of your television before you
start. Set the television so that it receives the
signal from an ANTENNA instead of CABLE or
SATELLITE.
Determine the signal strength
Before Installation, determine the best location
for optimum reception. It is important for the
antenna to have an unobstructed path to the
transmitter. For best results, ensure the antenna
faces the location of the transmitter.
Note
Choose a location near a window which gives the
•
antenna a clear view of the transmitter.
Note
Place the antenna away from the metal surface to
•
avoid interference.