Assembly steps – Precor EFX 5.23 User Manual
Page 52
EFX5.21/ 5.23 Elliptical Fitness CrossTrainer Assembly Guide
3
Assembly Steps
Important: Read the Installation Requirements before assembling
the EFX.
Ask your assistant to hold the right stabilizer, which has the cable
protruding from both ends, next to the base frame. Connect the
base cable. An audible click is heard when the cable is properly
attached. Place excess cable into the base frame.
Secure the stabilizer to the base frame using four hex head screws
(A) and four washers (B). Partially tighten.
Note: For easier access to the base mounts, lift the front of the
EFX off the floor and place a wedge of packing material beneath its
base.
See also other documents in the category Precor Sports and recreation:
- 300753-201 (96 pages)
- EFX 5.25 (64 pages)
- EFX 5.25 (56 pages)
- EFX 5.19 (58 pages)
- Low Impact 9.27 (53 pages)
- 956i (114 pages)
- 846i (112 pages)
- Leg Press S3.25 (20 pages)
- 9.35 (96 pages)
- 9.23 (59 pages)
- S3.15 (36 pages)
- Low Impact M9.33 (66 pages)
- M9.1 (32 pages)
- RBK 815 (88 pages)
- RECUMBENT RBK 800 (100 pages)
- M9.20s (40 pages)
- Electronic M9.4 (21 pages)
- ELLIPTICAL FITNESS CROSSTRAINERS EFX 885 (104 pages)
- EFX 5.21 (60 pages)
- LOW-IMPACT TREADMILLS 9.31 (86 pages)
- Commercial EFX EFX546 (40 pages)
- EXPERIENCE STRENGTHTM C-LINE CW34871-101 (45 pages)
- 946i (101 pages)
- Low Impact 9.23 (53 pages)
- Elliptical Fitness Crosstrainer EFX (108 pages)
- Elliptical Fitness Crosstrainer EFX (58 pages)
- TRM 800 (64 pages)
- RBK 800 (52 pages)
- Low Impact M9.55 (52 pages)
- EFX 556i (70 pages)
- Total Body 904 (28 pages)
- EFX 821 (48 pages)
- M9.41s (4 pages)
- AMT 885 (100 pages)
- Low Impact with the CardiologicTM System featuring Smart Rate M9.25i (44 pages)
- C932 (60 pages)
- Leg Press Option S3.15 (16 pages)
- Low Impact s 9.21i (36 pages)
- 5.33 (68 pages)
- EFX534 (56 pages)
- S3.23 (24 pages)
- Ellipticals EFX34i (80 pages)
- UBK 800 (52 pages)
- Manual 903 (20 pages)