Polycom VVX C Business Media Phone for Cisco Unified Communications Manager (SIP) User Manual
Page 25
Setting Up the Polycom VVX 1500 C Phone
3 - 5
For organizational purposes, configuring a separate log file directory, override
directory, contact directory, and license directory is recommended, but not
required. The different directories can have different access permissions. For
example, for LOG, CONTACTS, and OVERRIDES, allow full access (read and
write) and for all others, read-only access.
To set up the provisioning server:
1.
Create a directory to store the application image and the configuration
files.
For example, C:\test\VVX1500 .
2.
Extract all files from the distribution zip file to the newly created
directory.
Maintain the same folder hierarchy.
The distribution zip file contains many files, but only the following are
required:
— 2345-17960-001.sip.ld
— phone1.cfg
— sip.cfg
— 000000000000.cfg
Refer to the SIP Release Notes
//www.polycom.com/support/voice/business_media_phones/vv
x1500c.html
.
3.
Start the FTP server and configure it to accept requests from the phone.
In the FTP server software on a computer, create a unique user with names
and passwords. For example, username user with password password.
Refer to your server documentation to set up the server.
Note
The instructions below are written using FTP server as the provisioning server, but
they also apply to any TFTP or HTTP server.
Note
The factory default username and password for the phone is PlcmSpIp.