Interface – Pioneer DVD / CD WRITER User Manual
Page 8
8
En
INTERFACE
REAR VIEW
Pin
Name
Function
1
L
Left channel audio output
2
G
Ground
3
G
Ground
4
R
Right channel audio output
Pin
Name
Function
1
MA
on The drive is the master device
2
SL
on The drive is the slave device
3
CS
on Set the drive to Cable Select
4
Reserved
5
Reserved
6
Audio Output
This connector is for output of analog audio and is compatible with Molex 70553. Choose a
suitable connection cable.
Pin
Name
Function
1
+12
Power supply input for DC +12 V
2
G
Ground
3
G
Ground
4
+5
Power supply input for DC +5 V
7
Device Configuration Jumper
The Switch changes to ON when a jumper is added (Pin 1 is on lower-right).
Verify that the power is OFF before changing the jumper setting.
The factory default forPin # 1 is ON.
8
Host IDE Interface
Use a 40-pin flat cable to connect the drive to the computer's Enhanced-IDE port. The maximum
length for this cable is 18 inches.
9
DC Input