Philips SBCLI805 - Manual (Page 7)

Troubleshooting
If a fault occurs, first check the points listed below. If you are unable to
remedy a problem by following these hints, contact the helpline
(see page 2) or consult your dealer.
Under no circumstances should you try to repair the receiver yourself as
this will invalidate the guarantee.
The receiver should work with almost any equipment except for some
brands mentioned in the previous paragraph.
In case the receiver does not work, check the following points:
• Is the receiver connected to the mains supply?
• Does the remote control have fresh batteries?
• Is the distance between remote control and receiver less than
15 meters?
• Is the receiver in line of site and facing the equipment to operate?
If this is not possible, connect the extension cord.
• When using the extension cord:
check if IR lights are properly attached to the IR sensors of your
equipment.
• Is the RF functionality of the RU 885 is enabled? See RU 885 User Guide.
• Make sure no massive metal parts are between the remote control and
the receiver. Metal will reduce or even block the RF signal.
Technical specifications
Power supply: 230-240 VAC / 50 Hz
IR carrier frequency: 32-40 kHz
RF receptance: 433.92 MHz
Need Help?
In case you have any questions about the LI 805, please contact our help-
line for assistance! You can find the number in the list on page 2.
Before you call, please read this manual carefully.
You will be able to solve most of your problems.
The model number of the remote control extender is SBC LI 805.
Date of purchase: _____ /_____ /______
day month year
ENGLISH 7
XP SBC LI 805 24-06-2002 09:06 Pagina 7