Philips SBCLI805 User Manual
Page 6
Operation
Operation with RU 885 RF remote control
1
Make sure the RF functionality of the RU 885 is enabled.
2
Select the equipment you wish to operate.
3
Point the remote control in the direction of the receiver and press the
required function button.
> The receiver will confirm reception by the flashing of the red light in the
window on the front and your equipment will respond.
•
For detailed operating instructions see the RU 885 User Guide.
Operation in the SBC LI 800 Remote Control
extender set
•
Once installed, the receiver can be used as additional receiver in the
SBC LI 800 Remote Control extender set.
•
For detailed operating instructions see the LI 800 User Guide.
Notes:
– The distance between remote control and receiver should not be greater than
15 meters.
– The set may not work properly or may not work at all with devices of the
following brands:
– Bang & Olufsen;
– Nokia (some satellite receivers);
– Sagem (some satellite receivers);
– Pace (some satellite receivers).
ENGLISH
6
XP SBC LI 805 24-06-2002 09:06 Pagina 6