Philips dcb310 User Manual
Page 4
& POWER
–
switches the system on or to standby mode
–
stops active alarm for 24 hours
–
deactivates the sleep function
* MENU
–
activates/confirm clock time/date setting
–
iPod: enters iPod menu.
–
DAB: enables access to advance setup options.
( (Wake-up mode) iPod
•
FM
•
DAB
•
BUZZER
–
selects alarm mode: iPod, FM, DAB or buzzer
) AUX jack (3.5 mm)
–
connects to external audio source
¡ FM / DAB Pigtail
–
improves FM / DAB reception
™ POWER jack
–
socket for AC/DC 15V adapter
POWER SUPPLY
Mains adapter
1 Connect the mains adapter to the set's POWER socket and to the power socket.
Helpful hints: To avoid damage to the set, use only the adapter supplied!
The type plate is located on the bottom of the set.
SELF-POWERED BACK-UP
The self-powered back-up conveniently allows your preset stations, alarm and clock
time settings to be stored for up to 3 minutes when there is a power interruption e.g.
AC power failure. The complete clock radio and backlight illumination will be switched
off.
If power supply returns after 3 minutes and the display shows:
• clock time blinking - indicates you need to re-adjust the clock time.
BASIC OPERATION
SWITCHING ON THE SYSTEM
• Press POWER.
™ The system will switch to the last selected source.
• Press once or more FM / DAB or iPod / AUX.
™ The system will switch to the selected source.
Switching the system to standby mode
• In any source mode, press POWER.
Illumination brightness
Press REPEAT ALARM /
BRIGHTNESS CONTROL
once or more.
• The brightness of the display can be adjusted:
Bright
➟
Low
➟
Off
➟
Bright .
SETTING THE CLOCK AND DATE
1. In any mode, press and hold MENU until clock digits flashes.
2. Press
2; to select 12 Hours/ 24 Hours mode.
3. Hold down or press PRESET +/- repeatedly to set and adjust the hours.
4. Press MENU to confirm.
™ The clock digits for the minutes flash.
5. Repeat the steps 3 - 4 until you complete all the other settings for minutes,
year, month and days.
CAUTION
High voltage! Do not open.You run the risk of getting an electric
shock. The machine does not contain any user-serviceable parts.
Modification of the product could result in hazardous radiation of
EMC or other unsafe operation.
DCB310_05_CCR 6/27/08 15:33 Page 4