Polaroid 206 - Manual (Page 26)

5-2
Picture Fault Cause Corrective Action
Small, white specks,
pink lines, streaks or
blotches
Pulling the film
through the rollers
too fast.
Pull the film using a
smooth, even,
moderate pull speed.
Muddy-looking print Development time not
long enough.
Develop film for time
recommended in film
instruction sheet.
Broad streak or mark
across the picture
Hesitating while
pulling the film from
the camera.
Pull the film tab
straight out in one
motion, without
hesitation.
Very light or no image Film fogged or
extremely
overexposed.
Do not remove the
safety cover prior to
loading the film.
Do not open the
camera and remove
the film pack while
taking a picture.