Polaroid 206 - Manual (Page 24)

4-2
Making display selections
The following functions can be adjusted from the LED display:
1 Exposure
For normal flash exposure, the middle light will be on.
READY
BOOST
PULL FILM
SELECT EXPOSURE
1
To increase exposure, press the UP arrow in the display.
Each time the arrow is pressed, the next higher light will
come on. To decrease exposure, press the DOWN
arrow; the next lower light will come on.
2 Select
Pressing “select” in the LED display, allows you to toggle
between “1”, shown above, and “2”.
Select “1” if you want to take two different poses in one
picture frame. When you press the shutter button to take
the first photo, the LED display will read “ready”,
prompting you to take another photo. Press the shutter
button a second time and the picture will contain two
different photos.
Select “2” If you want two identical poses in one frame.
When you press the shutter button, the camera will take
twin photos of the same subject.