Philips RU254 - Manual (Page 6)

READING OUT THE 4-DIGIT BRAND CODE
After using autosearch to set up the remote control, note the 4-digit code for
future use.
1. Press the device button of the device you want to read the code from.
2. Press and release keys 1 and 6 simultaneously.
Important: after pressing the keys, you have to release them immediately!
– The indicator LED lights up.
3. Press -/--;
– The LED indicator goes out.
4. Press 1:
– The indicator starts to blink; Count the number of blinks for the first digit.
Note: if the indicator does not blink, the digit is 0.
5. Press 2:
– The indicator starts to blink; Count the number of blinks for the second digit.
6. Press 3:
– The indicator starts to blink; Count the number of blinks for the third digit.
7. Press 4:
– The indicator starts to blink; Count the number of blinks for the fourth digit.
8. Write down the code inside the remote's battery lid.
Instructions for use English
6
English
Device
TV
VCR
SAT
AUX
Brand Model nr. RC model nr. Used code
XP SBC RU 254.1 booklet 31-01-2003 11:55 Pagina 6