Philips RU254 - Manual (Page 4)

INTRODUCTION
Congratulations on your purchase of this Philips Universal remote control. This
remote control is designed for easy operation of most equipment in the home. It
can replace up to 4 remote controls of almost any brand, for televisions (TV), video
recorders (VCR), satellite receivers (SAT) and DVD equipment, even if the original
remote control is lost or broken.
The Philips Universal Remote Controls are ready for use with Philips TV, VCR, SAT
and DVD equipment. To operate equipment from other brands, you have to set up
the Universal Remote Control by following 3 easy steps.
If the brand of your equipment is known, follow the procedure described in
chapter: SETTING UP BY CODE ENTRY
If the brand of your equipment is unknown or not in the code list, you can have the
Universal Remote Control do an automatic code search for your equipment.
See chapter SETTING UP BY AUTOSEARCH.
FUNCTIONS OVERVIEW (see diagram)
A Indicator LED
B TV/VCR/SAT/DVD Device buttons
C y
Power
D Menu To operate menu control
E P+, P- Next / previous programme
TV volume Controls
F a TV Volume louder / softer
G c Mute
Even if you're operating the VCR/DVD, you can directly access the volume of the
TV
with these buttons
H Digits 0..9
I -1/2 digits, 10, 1-
J AV
External / source select
K a Teletext on
L I Teletext off
M Shift Shift button
N OK To confirm your selection
O FastText keys / VCR/DVD
red
5 rewind
green 9 stop
blue 6 wind
2 play
yellow ; pause
0 record
Depending on your equipment, some buttons may work differently.
Check the manual of your equipment to know which functions it will operate.
NORMAL OPERATION
1. Press a device button to select the device you want to operate
2. Press any of the function buttons to operate that function.
Instructions for use English
4
English
XP SBC RU 254.1 booklet 31-01-2003 11:55 Pagina 4