PYLE Audio PLCD18MRMP - Manual (Page 12)

For detailed operations, please see
below:
BEEP ON/OFF
When beep on, the beep in generated
when every button is pressed.
When beep off, the beep is disabled
when press any button.
Program power on volume level
In this mode, you can set the desired
volume level when the unit turns on.
USA/EUR
In this mode, you can select USA or
European radio frequency spacing.
- USA radio spacing is 200k for FM and
10k for AM. This is the default
frequency spacing.
- European radio spacing is 50k for FM
and 9k for AM.
CLOCK ON/OFF while power off
In this mode, you can select if the clock
is to be displayed while power off.
FREQ/CLOCK/NO PRI priority
- When select Frequency Priority:
The frequency will appear on the unit
all the while. Pressing DISP button (1)
while in Frequency Priority will
temporarily display clock and then
returns to frequency display.
- When select Clock Priority:
The clock will appear on the unit all
the while. Pressing DISP button (1)
while in Clock Priority will temporarily
display selected station frequency (in
RADIO mode) or track number (in
CD/CDC mode) and then returns to
clock display.
- When select No Priority:
When the frequency appears on the
unit, pressing DISP button (1) will
display clock and it will not return to
frequency display until DISP button
(1) pressed again. When the clock
appears on the unit, pressing DISP
button (1) will display frequency
information.
12hours/24hours
In this mode, you can set 24 hours
mode or 12 hours mode.
- When the currently displayed function
has not been adjusted for several
seconds, it will exit menu set mode.
- When you have set CLOCK ON during
power off state, LCD backlight will be
turn on together.
12
OPERATION
• LOUDNESS
Press LOUD (DIM) button (15) shortly
to reinforce the bass output and display
will show “LOUD”. Press it again to
release this function.
• ILLUMINATION
Press LOUD (DIM) button (15) for more
than 2 seconds to adjust the brightness
of the LCD display backlight.
• MUTE
In radio/AUX IN mode, press
/MUTE button (3) to mute audio level.
Press the button again to release mute
function.
• SELECT MODE
Press MODE button (6) to choose
desired listening mode. (e.g. radio mode
to CD (MP3) mode to CDC mode to
AUX IN mode.
• SET THE CLOCK
Press DISP button (1) for more than 2
seconds until the clock is shown on the
display and flashes. Then press the
button (17) to change minutes or
button (16) to change hours.
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (8).
• ESP FUNCTION
If the unit has the electronic shockproof
function, it can be shockproof about
several tens of seconds.
• RESET
Reset button (25) must be activated
with either a ballpoint pen or thin metal
object. The reset button is to be
activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: If press reset button (25), the
unit can’t work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the front panel.
• RECOVERING INITIAL VALUE
In radio (AM/FM/WB) mode, press
MODE button (6) for more than three
seconds, the display will appear “EEP
INIT”, and all settings recover factory
value.