PYLE Audio PLTVCP85 - Manual (Page 8)

7
8. Fast Forward / Cue Key
9. REC Key
Press the REC key for at least one second to start recording.
10. DEW/HEAT Lamp
When power is on, this indicator flashes red to indicate excessive moisture buildup inside
the VCR.
The unit will not operate unit it dries out sufficiently ( the tape can be ejected from the unit).
When DEW mode has been activated, leave the unit on the allow it to dry out completely.
11. Hi-Fi Lamp
In the Hi-Fi out mode, the lamp will light up in red.
12. Auto Repeat Lamp
During Auto repeat operation, Auto Repeat lamp will light up in red.
13. Audio/Video In Jacks (AV2)
Connect these jacks to the audio/video out jacks terminal of your game machine or
camcorder using the RCA cord.
For displaying this Front A/V lnput connected, Input Signal should be set to " AV2" in
Menu setting mode.
If this key is pressed in the PLAYBACK mode, the VCR enters the forward picture search
mode, and "FF" indicator lamp will be blinked.
If pressed in STOP mode, then the tape will fast forward at high speed,
the indicator lamp will up in red.
7. Play / Re-AutoTracking
Press this key to playback a recorded tape, or to release special operation such as the
search mode.
In the playback mode the playback indicator lamp will be light in red, and Auto
Tracking mode, this indicator lamp will blink.
When the playback picture is noisy, press this key to operates Re-Auto Tracking.