PYLE Audio PLTVCP85 - Manual (Page 16)

15
TROUBLE SHOOTING
There is no power
to the VCR?
Noise bars on
screen.
Operation key does
not work.
Cassette is ejected
upon inserting
Audio output does
not change to
Hi-Fi mode.
The power cord is not
connected.
The polarity of power cord
is not correct.
Tracking is not adjusted.
If the cassette or the VCR
is not in normal condition,
every indicator LED/LAMP
lights up and the VCR does
not work.
Safety device works to
protect the cassette when
it is inserted incorrectly.
The cassette is recorded
in mono VCR.
The first auto tracking is
executing unit now.
No backlighting at
power button.
Before calling service personnel, check the following points for a possible cause of the trouble.
A minor adjustment on your part may eliminate the trouble.
Check the power cord.
Change the polarity of
power cord.
Adjust the picture to be clear
by pressing the Re-tracking.
Turn off the power and turn on
the power again by pressing
the POWER cord. Unplug and
replug the power cord.
Pull the cassette out (unloading)
and insert it firmly into the
cassette compartment.
The cassette can not be
playback in Hi-Fi mode.
Wait for a second.
SYMPTOMS CAUSE POSSIBLE SOLUTIONS
No 12V DC. Check circuit fuse at source of
power
(see vehicle/converter manual).
In-line fuse of power cord
(in light plug).
Power cord unplugged from
12V outlet or at rear of unit.