Philips SBCRP520/00 - Manual (Page 6)

English
Instructions for use
6
Additional functions TV Additional functions VCR
300 Smart picture 500 -/--
301 Smart Sound 501 Select/VPS
302 EPG 502 Timer
303 EPG info
503 Pause
304 EPG record 504 Clear
305 Set alarm 505 Go to
306 Alarm reset 506 TV/VCR
307 Alarm on/off 507 SP/SL play
308 Light on 508 Showview
509 Monitor
510 Tuner
Access to added functions
1
Press and hold the Shift button on the left top side of
the remote control.
2
Simultaneously press the button of the added function.
Resetting all functions
If you want to return to the original functions of all keys and
delete all added functions under programmed keys:
Press and hold the OK and digit 0 button simultaneously for
about five seconds.
– The buttons on your remote control will now perform their
default functions.
TROUBLESHOOTING GUIDE
• Problem:
– Solution:
• The SBC RP520 is not working at all.
– The SBC RP520 needs to be adjusted to your TV. See
‘Adjustments to your remote control’
– The batteries are empty. Place new 1,5V AA batteries.
• Your TV is sometimes not responding to remote control
commands.
– Aim the remote control to your TV and be sure there are no
obstacles in between.
– The batteries are almost empty. Place new 1,5V AA batteries.
• The colour buttons are not working properly .
– The SBC RP520 needs to be adjusted to your TV. See
‘Adjustments to your remote control’.
• Teletext buttons are not working or not working properly.
– The SBC RP520 needs to be adjusted to your TV. See
‘Adjustments to your remote control’.
• The Picture in Picture (PIP) buttons are not working.
– The SBC RP520 needs to be adjusted to your TV. See
‘Adjustments to your remote control’.