Panasonic KX-FPG377 - Manual (Page 45)

4. Fax
43
4.4.3 Erasing a stored item from
the broadcast memory
1 Press {>}.
2 Press {A} or {B} repeatedly to display
“”.
3 Press {MENU}.
4 Press {#}.
5 Press {A} or {B} repeatedly to display the
desired item you want to erase.
L To cancel erasing, press {STOP}.
6 Press {SET}.
7 Press {SET} again.
L To erase other items, repeat steps 5 to 7.
8 Press {STOP}.
4.4.4 Sending the same
document to pre-programmed
parties
1 Insert the document FACE DOWN.
2 If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 40).
3 Press {>}.
4 Press {A} or {B} repeatedly to display
“”.
5 Press {SET}.
L The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each party, calling
each number sequentially.
L After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L If you select “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages that
the unit can transmit will decrease.
L If the document exceeds the memory
capacity, transmission will be canceled.
L If a party is busy or does not answer, it will be
skipped and redialed later up to 2 times.
To send the same document to a one-time
group of items
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display “
TIME BROAD> ”.
4. Press {SET} to start programming the items
you want to transmit to.
5. Press {A} or {B} repeatedly to display the
desired item.
6. Press {SET}.
L To program other items, repeat steps 5
and 6 (up to 20 items).
7. Press {SET} to start transmission to the
programmed items.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
“BROADCASTING”.
L The display will show “SEND
CANCELED?
”.
2. Press {SET}.
FPG376.book Page 43 Wednesday, July 30, 2003 6:28 PM