Peavey RQ 1606M - Manual (Page 14)

Function Input z Input Gains Input Levels^ Bal./ Connector
(ohms) Setting Min** Nominal* Max UnBal.
Min
XLR Input 2.2 k Max gain -77 dBu -57 dBu -35 dBu Bal. XLR: Pin 1 Gnd
(150 ohms) (57 dB) Pin 2 (+),
Pin 3 (-)
Min. gain -30 dBu -10 dBu +12 dBu
(10 dB)
Hi-Z 10 k Max. gain -77 dBu -57 dBu -35 dBu Bal. 1/4" TRS: Tip (+),
(10 k ohms) (57 dB) Ring (-),
Sleeve Ground
Min. gain -30 dBu -10 dBu +12 dBu
(10 dB)
Insert 22 k N/A -20 dBu 0 dBu +22 dBu Unbal. 1/4" TRS: Tip Send,
Return (0 dB) Ring Return,
Sleeve Ground
Monitor Aux 10 k N/A -20 dBu 0 dBu +21 dBu Ba.l 1/4" TRS: Tip (+),
Input (0 dB) Ring (-),
Sleeve Ground
Talkback 2.2 k N/A -54 dBu -30 dBu -8 dBu Bal. XLR: Pin 1 Gnd
Mic (30 dB) Pin 2 (+),
Pin 3 (-)
RQ ® 1606M Monitor Console
Specifications:
Input Specifications:
0 dBV=1V (RMS)
** Min input level (sensitivity) is the smallest signal that will produce nominal output (0 dBu) with channel and master
level controls set for maximum gain.
* Nominal settings are defined as all controls set at 0 dB (or 50% rotation for rotary pots) except the gain adjustment pot,
which is as specified.
^ Input 20 dB pad is not included in these levels.
14
Specifications subject to change without notice.