Panasonic WORKIO C213 - Manual (Page 8)

8
Chapter 1 Basic Menu Features
Selecting the Color Mode
You can either copy in the machine selected color mode, or you can manually change it.
z The default color mode settings can be changed. Refer to Copier Settings (For Key Operator) in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
z Manually selected color mode settings will return to the default settings under the following conditions.
- If the Reset key is pressed.
- If Auto Reset Time interval has lapsed (default = 1 min).
- If the power is turned OFF.
1
Place original(s).
z
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “Quality Adj.”.
4
Select the desired Color Mode, and
then select “OK”.
5
Enter the desired number of copies.
6
Press the Start key.
z After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Full color Monochrome
Full Color
Monochrome
2 Color
1 Color
Monochrome
1 Color
Ex: Full Color
• Auto:
The color original is copied in Full
Color and the monochrome
original is copied in Black & White
by automatically detecting the
original’s color.
• Black (Monochrome) (see page 9)
• Full Color (see page 9)
• 2 Color (see page 10)
• 1 Color (see page 12)