Chapter 2 more menus features – Panasonic WORKIO C213 User Manual
Page 57
57
Chapter 2 More Menus Features
5
Select “XY” to set the same value for X
and Y, or “X”, “Y” to set a different
value for X and Y.
6
Input the erasing width with “
S” and
“
T”, or the keypad, and then select
“OK”.
z
The erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
z
When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
(Only Sort setting)
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
XY
Select to set the same erasing width
for all sides.
X
Select to set the erasing width for the
right and left sides.
Y
Select to set the erasing width for the
top and bottom sides.