Polycom READIMANAGER LX100 - Manual (Page 8)

P OLYCOM R EADI M ANAGER LX100 G ETTING S TARTED G UIDE
6
Rear Panel
Item Function
1 Power Connects to power
2 PS/2 port Mouse – Green
Keyboard - Purple
3 USB 0/1
Ports
Universal Serial Bus port
4 COM1 Port RS-232 port
5 Parallel Port Printer cable port
6 Monitor VGA monitor port
7 LAN1 Ethernet port for connecting to the network.
8 LAN2 Disabled
Enabling Remote Access
Before the Polycom ReadiManager LX100 can be configured for scheduling or
device management, the unit needs to be configured and connected to the
network. Once these tasks are accomplished, the unit can be accessed
remotely from any web browser within your network.
There are two main steps to configuring your ReadiManager LX100 for remote
web access:
Physically connecting the units
Configuring the network settings
Configuring the Unit to Connect to the Network
There are two ways of enabling remote access of the unit: connecting the unit
to a PC with a crossover cable or connecting the unit to a hub along with a PC
connected to the same hub.
Required Components