Panasonic DMC-FX5PP - Manual (Page 16)

Preparation
16
Using the AC Adaptor
You can use the camera without worrying about battery discharge by connecting to
an AC adaptor.
Preparation
• Check that the camera is turned off and that the lens is retracted.
1 Connect the AC cable.
2 Open the terminal door.
3 Connect the DC cable.
• Align the [ 2] mark 1 on the DC
cable and the [ 1] mark 2 on the
[DC IN] socket.
¬Suggestions/Tips ¬
• Use the supplied DC cable.
If you use other DC cables, it may
cause a malfunction.
• The camera becomes warm during
use. This is not a malfunction.
• Disconnect the AC adaptor and DC
cable when the camera is not in use.
• The battery cannot be charged in the
camera even if the AC adaptor is
connected.
DIGITAL
DC IN
EXT.
AV OUT
FX5_FX1-PP.book 16 ページ ２００３年１２月１５日 月曜日 午後１時２７分