Panasonic DMC-LS1GN User Manual

Page 20

Preparation

VQT0Q78

∫ Access to the built-in memory or the

card

When pictures are being recorded onto the
built-in memory (or the card), the access
indication lights red.

A: When the built-in memory is used
B: When the card is used

When the access indication lights, pictures
are being read or deleted, or the built-in
memory (or the card) is formatted, do not:
• turn the camera off.
• remove the batteries or the card (if used).
• shake or impact the camera.
• disconnect the AC adaptor (DMW-AC2;

optional).
(when using the AC adaptor)

The card and the data may be damaged
and the camera may not operate normally.

• The built-in memory (about 14 MB) can

be used as a temporary memory
instead of the card, when the capacity
of the card becomes full.

• The data on the built-in memory or the

card may be damaged or lost due to
electromagnetic wave, static electricity or
breakdown of the camera or the card. We
recommend storing precious data to the
PC or other.

• The access time on the built-in memory

may become longer than the access time
on the card. (Max. about 7 sec.)

• Do not format the built-in memory or the

card with a PC. Please use the camera to
format the built-in memory and the card.
(P79)

2304

VQT0Q78ENG.book 20 ページ２００５年２月１４日　月曜日　午後１時１５分