Panasonic SC-HT545 - Manual (Page 10)

R
Q
T
8654
Simple
Se
tu
p
10
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control signal sensor ( ➜ page 11), avoiding
obstacles, at a maximum range of 7 m directly in front of the unit.
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, refer to its operating instructions.
≥ This remote control can perform some basic television operations (
➜ page 31).
To change these settings later
Select “QUICK SETUP” in the “Others” tab (
➜ page 24).
STEP
6
Preparing the remote control
R6/LR6, AA
1
3
2
Remote control Batteries
Insert so the poles ( i and j) match those in the remote control.
≥ Do not use rechargeable type
batteries.
STEP
7
Performing QUICK SETUP
RETURN
DVD
ENTER
SETUP
1 Turn on the unit.
2 Select “DVD/CD”.
3 Press and hold to show
the QUICK SETUP
screen.
4 Follow the messages
and make the settings.
5 Press to finish QUICK
SETUP.
6 Press repeatedly to exit.
Select
Register
ENTER
P
re
p
arin
g the
remo
te c
ontr
o
l/
P
erf
o
rmin
g Q
U
ICK SETUP
HT545 545W En.book Page 10 Wednesday, April 5, 2006 9:41 AM