Philips VPB115AT - Manual (Page 10)

10 Hookups With a Stereo TV
ANT OUT
ANT IN
AUDIO
CH3
CH4
VIDEO
OUTPUT DC 13.2V
antenna or cable to
ANT(enna) IN Jack
Video Cable
Audio Cable
VIDEO (yellow) and AUDIO (white)
OUTPUT Jacks
Audio and Video
IN Jacks on TV
● Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCP.
2
Connect a video cable to the yellow VIDEO OUTPUT
Jack on the back of the VCP. Then, connect the other
end of the video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the white AUDIO OUTPUT
Jack on the back of the VCP. Then, connect the other
end of the audio cable to the AUDIO IN Jack on your TV.
(If your TV has Right and Left AUDIO IN Jacks, you must use a
“Y” splitter audio cable as illustrated to deliver audio to the TV’s
left and right channels.)
4
Turn on your TV, making sure it is in Line Input mode. Please
refer to your TV owner’s manual for details.
• This hookup will not give you stereo
sound. To get stereo sound, use the
connections on pages six-nine and
select the channel to be viewed at
the TV or the Cable Box (with the
VCP turned off).
Helpful Hint