Panasonic DMC FZ 28 - Manual (Page 86)

VQT1S36
86
Advanced (Recording pictures)
∫ Setting up [ ] (AF Tracking)
Note
• If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
• AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [ Ø ] in [AF MODE] in that case.
• AF tracking cannot be selected for [STARRY SKY], [FIREWORKS], [PIN HOLE] or
[FILM GRAIN] in the scene mode, $ mode, or [COLOR EFFECT] is selected.
• [ ] does not work in AF tracking.
• The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
(Tele-macro function: 1 m (3.28 feet) to ¶)
• Dynamic tracking function may not work in the following cases:
– When the subject is too small
– When the recording location is too dark or bright
– When the subject is moving too fast
– When the background has the same or similar color to the subject.
– When jitter is occurring
– When using the zoom
∫ About AF area selection
You can select the AF area by pressing [AF#/FOCUS] when [
], [ƒ], [Ø] or [Ù] is
selected.
It is also possible to switch to AF area selection screen by pressing 1 when AF mode is
selected with 3/4.
•
You can set from the quick menu. (P23)
When selecting [ƒ], [Ø] or [Ù]
1
Press 3/4/2/1 to move the AF area.
•
You can set to arbitrary position of the
screen. (It cannot be set to edge of the
screen)
• After moving the AF area, press [DISPLAY]
to return it to the center.
2 Press [MENU/SET] to set.
1 Bring the subject to the AF tracking
frame, and press [AF/AE LOCK] to lock
the subject
•
AF area will continuously focus on the
subject's movement once the subject is
recognized. (Dynamic tracking)
• AF tracking is canceled when [AF/AE
LOCK] is pressed again.
Before locking Locked
2 Take the picture
ƒ Ш Щ
DMC-FZ28P_PC.book 86 ページ ２００８年７月３日 木曜日 午後１２時１２分