Philips SPC315NC - Manual (Page 8)

EN
8
Installation
Installing the WebCam software
The software supplied only works on PCs with the operating
systems Microsoft
® Windows ® 98SE, ME, 2000 and XP.
Notes!
– Unplug all your USB devices (except USB keyboard and
USB mouse) before you start.
– Do not plug in your WebCam yet. Run the Installation CD-ROM
first.
– Have your Windows ® CD-ROM at hand.
– The SPC315NC WebCam is 'XP Plug & Play'. This means if you are
running Windows XP and you have installed Service Pack 2 and
the latest Microsoft Windows XP updates you don't need to install
the SPC315NC WebCam driver. Simply plug in the camera and you
can start using your SPC315NC WebCam.
1 Place the installation CD-ROM in your PC’s / laptop’s
CD-ROM / DVD drive.
> After a couple of seconds the the ‘Language selection’ screen
appears automatically.
Note!
If the 'Language selection' screen does not appear automatically,
open the Microsoft
® Windows ® Explorer and double click on the
'Set-up.exe' icon in the CD-ROM directory.
2 Select your language and click on the 'OK' button.
> The following screen appears.
3 Select at least the ‘SPC315NC PC WebCam Driver’ and
‘Philips VLounge’ and click on the 'Next' button.