Plantronics Wireless Headset System WO100 - Manual (Page 12)

Plantronics Savi User Guide 12
6 PC Set Up
6.1 Installing USB Cable
1 Connect the USB cable to the USB port on the back of
the base.
2 Connect the other end of the USB cable to the USB port
of the PC.
6.2 Installing PerSono Suite Software
1 In the animated setup guide located on the CD, select
Step 6.2 Installing PerSono Suite Software.
2 Click on the graphic of the CD labeled “PerSono Suite
Software”.
3 Follow installation instructions shown on screen.
6.3 Making a test Call with PC
1 ensure the PerSono Suite software is running on your
PC. You will see a headset icon in the lower right portion of
the PC tray bar when PerSono Suite software is running
.
2 With your headset on, press the PC talk button on
the base.
3 Dial the number using your softphone application.
4 Adjust listening and speaking volume over the PC as
follows:
For Windows ® XP Systems-
Go to the “Voice” tab of the “Sounds and Audio Devices”
option in your PC control Panel.
• “Voice playback” volume is your receive volume
• “Voice recording” volume is your transmit volume
For Windows Vista ® Systems-
Go to the “Playback” tab for listening volume or
“Recording” tab for speaking volume of the “Sound” option
in your PC control panel.
• “Speakers Level” volume is your receive volume
• “Microphone Level” volume is your transmit volume
5 You can also fine tune the listening volume on the
headset by pushing the call control button up to
increase the volume and pushing down to decrease the
volume.
6 to end the test call, press the call control button on
the headset.