Plantronics Wireless Headset System WO100 - Manual (Page 10)

Plantronics Savi User Guide 10
5 Lifter Set Up (Optional)
5.1 Installing Lifter
5.2 If You Do Not Hear a Dial tone
1 If you do not hear a dial tone, raise the lifter height
switch to the next highest position.
1 Firmly press the handset lifter power cord into the
handset lifter jack.
2 While wearing your headset, slide the handset lifter arm
under the handset until the lifter base touches the side
of the phone.
3 Slide the lifter up to where it nearly touches the handset
earpiece.
7 Gently place the lifter on the desk phone in the pre-
determined position.
8 Press firmly to adhere.
Handset Lifter
Power Cord
2 Repeat steps 2 through 5 in Section 5.1 as necessary
until you hear a dial tone.
3 When you hear a dial tone, secure the lifter as described
in steps 6 though 8.
4 Press the call control button on your headset to activate
the lifter.
5 If you hear a dial tone the lifter is set correctly and needs
no adjustment.
6 Remove the protective strips from the 3 mounting tapes
on the underside of the lifter.